View PS7142-1A-A_1046395.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

DATA SHEET
NEC's 6-PIN DIP PS7142-1A 400 V BREAK DOWN VOLTAGE PS7142L-1A 1-CH OPTICAL COUPLED MOS FET
FEATURES
* * * * 1 CHANNEL TYPE: 1aOutput LOW LED OPERATING CURRENT: IF=2mA DESIGNED FOR AC/DC SWITCHING LINE CHANGER SMALL PACKAGE: 6-PinDIP
DESCRIPTION
NEC'sPS7142-1AandPS7142L-1Aaresolidstate relayscontainingGaAsLEDsonthelightemitting side(inputside)andMOSFETsontheoutputside. Theyaresuitableforanalogsignalcontrolbecauseof theirlowoffsetandhighlinearity. ThePS7142L-1Ahasasurfacemounttypelead.
* LOW OFFSET VOLTAGE * PS7142L-1A: Surfacemounttype * SAFETY STANDARDS: ULapproved:FileNo.E72422(S) BSIapproved:FileNo.8245/8246 CSAapproved:FileNo.CA101391
APPLICATION
* Exchange Equipment * Measurement Equipment * FA/OA Equipment
California Eastern Laboratories
PS7142-1A, PS7142L-1A PACKAGE DIMENSIONS (UNIT: mm)
PS7142-1A
9.250.5
TOP VIEW
6 5 4
1. LED Anode 2. LED Cathode 3. NC 4. MOS FET Drain 5. MOS FET Source 6. MOS FET Drain
1
2
3
7.62 6.50.5
3.30.3 4.150.3
3.50.3
0.50.1 1.340.1 0.25 M
0 to 15 2.54
PS7142L-1A
9.250.5 6 5 4
TOP VIEW
1. LED Anode 2. LED Cathode 3. NC 4. MOS FET Drain 5. MOS FET Source 6. MOS FET Drain
1
2
3
6.50.5
3.50.3
1.340.1 0.25 M
2.54
0.90.25 9.600.4
0.10+0.10 -0.05
PS7142-1A, PS7142L-1A ORDERING INFORMATION (Pb-Free)
PART NUMBER PS7142-1A-A PS7142L-1A-A PS7142L-1A-E3-A PS7142L-1A-E4-A EmbossedTape 000pcs/reel 1 PACKAGE 6-pinDIP PACKING STYLE Magazinecase50pcs APPLICATION PART NUMBER *1 PS7142-1A PS7142L-1A
*1 FortheapplicationoftheSafetyStandard,followingpartnumbershouldbeused.
PS7142-1A, PS7142L-1A ABSOLUTE MAXIMUM RATINGS (TA = 25C, unless otherwise Specified)
PARAMETER Diode ForwardCurrent(DC) ReverseVoltage PowerDissipation PeakForwardCurrent *1 MOS FET BreakDownVoltage Continuous LoadCurrent *2 ConnectionA ConnectionB ConnectionC PulseLoadCurrent *3 (AC/DCConnection) PowerDissipation IsolationVoltage *4 TotalPowerDissipation OperatingAmbientTemperature StorageTemperature PD BV PT TA Tstg 560 1500 610 -40to+85 -40to+100 mW Vr.m.s. mW C C ILP SYMBOL IF VR PD IFP VL IL RATINGS 50 5.0 50 1 400 200 250 400 400 mA UNIT mA V mW A V mA
*1 PW=100s,DutyCycle=1% *2 Conditions:IF2mA.Thefollowingtypesofloadconnectionsareavailable.
1 2 3 1 2 3 1 2 3 1 2 3 6 5 4 6 5 4 6 5 4 6 5 4 IL IL IL L L IL + IL IL IL L L VL (AC/DC) + VL (DC) + VL (DC) + VL (DC) -
Connection A
Connection B
Connection C
*3 PW=100ms,1shot *4 ACvoltagefor1minuteatTA=25C,RH=60%betweeninputandoutput
PS7142-1A, PS7142L-1A RECOMMENDED OPERATING CONDITIONS
PARAMETER LEDOperatingCurrent LEDOffVoltage SYMBOL IF VF MIN. 2 0 TYP. 10
(TA=25C)
MAX. 20 0.5 UNIT mA V
ELECTRICAL CHARACTERISTICS
PARAMETER Diode ForwardVoltage ReverseCurrent MOS FET Off-stateLeakageCurrent OutputCapacitance Coupled LEDOn-stateCurrent On-stateResistance Turn-onTime Turn-offTime
*1 *1
(TA=25C)
CONDITIONS MIN. TYP. 1.2 MAX. 1.4 5.0 0.03 225 2.0 6.0 0.8 0.02 10
9
SYMBOL VF IR ILoff Cout IFon Ron1 Ron2 ton toff RI-O CI-O IF=10mA VR=5V VD=400V
UNIT V A A pF mA ms
1.0
VD=0V,f=1MHz IL=200mA IF=10mA,IL=10mA IF=10mA,IL=200mA,t10ms IF=10mA,VO=5V,RL=500, PW10ms VI-O=1.0kVDC V=0V,f=1MHz
10 5.0 0.2
IsolationResistance IsolationCapacitance
1.1 pF
*1 TestCircuitforSwitchingTime
IF
Pulse Input
VL Input
50 % 0
Input monitor Rin RL
VO monitor
VO = 5 V Output
90 %
10 % ton toff
PS7142-1A, PS7142L-1A TYPICAL CHARACTERISTICS
(TA = 25C, unless otherwise specified)
MAXIMUM FORWARD CURRENT vs. AMBIENT TEMPERATURE
Maximum Forward Current IF (mA) 100 80 60 40 20 0 -25 Maximum Load Current IL (mA) 300
MAXIMUM LORD CURRENT vs. AMBIENT TEMPERATURE
200
100
0
25
50
7585
100
0 -25
0
25
50
7585
100
Ambient Temperature TA (C)
Ambient Temperature TA (C)
FORWARD VOLTAGE vs. AMBIENT TEMPERATURE
1.8 1.6 1.4 1.2 1.0 0.8 -25 Output Capacitance Cout (pF) IF = 50 mA 30 mA 20 mA 10 mA 5 mA 1 mA 250 200 150 100 50
OUTPUT CAPACITANCE vs. APPLIED VOLTAGE
f = 1 MHz
Forward Voltage VF (V)
0
25
50
75
100
0
20
40
60
80
100
120
Ambient Temperature TA (C)
Applied Voltage VD (V)
OFF-STATE LEAKAGE CURRENT vs. APPLIED VOLTAGE
10 Off-state Leakage Current ILoff (A)
-5
LORD CURRENT vs. LORD VOLTAGE
300 IF = 10 mA 200 Load Current IL (mA) 100
TA = 85 C
10-6
10-7
25 C
-1.5
-1.0
-0.5 -100 -200
0
0.5
1.0
1.5
10-8
10-9 0
100
200
300
400
500
-300 Load Voltage VL (V)
Applied Voltage VD (V)
PS7142-1A, PS7142L-1A
NORMALIZED ON-STATE RESISTANCE vs. AMBIENT TEMPERATURE
Normalized On-state Resistance Ron
3.0 2.5 2.0 1.5 1.0 0.5 0.0 -25 0 25 50 75 100
ON-STATE RESISTANCE DISTRIBUTION
30 25 20 15 10 5 0 5.0 5.5 6.0 6.5 7.0 n = 50 pcs, IF = 10 mA, IL = 10 mA
Normalized to 1.0 at TA = 25 C, IF = 10 mA, IL = 10 mA
Number (pcs) Ambient Temperature TA (C)
On-state Resistance Ron ()
TURN-ON TIME vs. FORWARD CURRENT
6 5 Turn-on Time ton (ms) 4 3 2 1 0 5 10 15 20 25 30 VO = 5 V Turn-off Time toff (ms)
TURN-OFF TIME vs. FORWARD CURRENT
0.6 0.5 0.4 0.3 0.2 0.1 0 5 10 15 20 25 30 VO = 5 V
Forward Current IF (mA)
Forward Current IF (mA)
TURN-ON TIME DISTRIBUTION
30 25 Number (pcs) 20 15 10 5 0 0.6 0.7 0.8 0.9 1.0 n = 50 pcs, IF = 10 mA, VO = 5 V Number (pcs) 30 25 20 15 10 5 0
TURN-OFF TIME DISTRIBUTION
n = 50 pcs, IF = 10 mA, VO = 5 V
0.02
0.03
Turn-on Time ton (ms)
Turn-off Time toff (ms)
PS7142-1A, PS7142L-1A
NORMALIZED TURN-ON TIME vs. AMBIENT TEMPERATURE
3.0 Normalized Turn-on Time ton 2.5 2.0 1.5 1.0 0.5 0.0 -25 0 25 50 75 100 Normalized to 1.0 at TA = 25 C, IF = 10 mA, VO = 5 V 3.0 Normalized Turn-off Time toff 2.5 2.0 1.5 1.0 0.5
NORMALIZED TURN-OFF TIME vs. AMBIENT TEMPERATURE
Normalized to 1.0 at TA = 25 C, IF = 10 mA, VO = 5 V
0.0 -25
0
25
50
75
100
Ambient Temperature TA (C)
Ambient Temperature TA (C)
Remark Thegraphsindicatenominalcharacteristics.
PS7142-1A, PS7142L-1A TAPING SPECIFICATIONS (UNIT:mm)
2.00.1 4.00.1
1.5 +0.1 -0
1.750.1
Outline and Dimensions (Tape)
4.5 MAX.
16.00.3
7.50.1
10.30.1
1.550.1 12.00.1
10.40.1 0.3
4.00.1
Tape Direction
PS7142L-1A-E3 PS7142L-1A-E4
Outline and Dimensions (Reel)
2.00.5
2.00.5 13.00.2 3302.0 21.00.8 1001.0
R 1.0
17.51.0 21.51.0
Packing: 1 000 pcs/reel
15.9 to 19.4 Outer edge of flange
PS7142-1A, PS7142L-1A
RECOMMENDED SOLDERING CONDITIONS
(1) Infrared reflow soldering * Peak reflow temperature * Time of peak reflow temperature *Timeoftemperaturehigherthan220C * Number of reflows * Flux *Timetopreheattemperaturefrom120to180C 260Corbelow(packagesurfacetemperature) 10 seconds or less 60secondsorless 12030s Three Rosin flux containing small amount of chlorine (The flux with a maximum chlorinecontentof0.2Wt%isrecommended.)
Recommended Temperature Profile of Infrared Reflow
Package Surface Temperature T (C)
(heating) to 10 s 260C MAX. 220C to 60 s 180C 120C 12030 s (preheating)
Time (s)
(2) Wave soldering * Temperature * Time * Preheatingconditions * Numberoftimes * Flux 260Corbelow(moltensoldertemperature) 10secondsorless 120Corbelow(packagesurfacetemperature) One Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt%isrecommended.) (3) Cautions * Fluxes Avoid removing the residual flux with freon-based and chlorine-based cleaning solvent.
Life Support Applications These NEC products are not intended for use in life support devices, appliances, or systems where the malfunction of these products can reasonably be expected to result in personal injury. The customers of CEL using or selling these products for use in such applications do so at their own risk and agree to fully indemnify CEL for all damages resulting from such improper use or sale.
04/20/2005
4590 Patrick Henry Drive Santa Clara, CA 95054-1817 Telephone: (408) 919-2500 Facsimile: (408) 988-0279
Subject: Compliance with EU Directives CEL certifies, to its knowledge, that semiconductor and laser products detailed below are compliant with the requirements of European Union (EU) Directive 2002/95/EC Restriction on Use of Hazardous Substances in electrical and electronic equipment (RoHS) and the requirements of EU Directive 2003/11/EC Restriction on Penta and Octa BDE. CEL Pb-free products have the same base part number with a suffix added. The suffix -A indicates that the device is Pb-free. The -AZ suffix is used to designate devices containing Pb which are exempted from the requirement of RoHS directive (*). In all cases the devices have Pb-free terminals. All devices with these suffixes meet the requirements of the RoHS directive. This status is based on CEL's understanding of the EU Directives and knowledge of the materials that go into its products as of the date of disclosure of this information.
Restricted Substance per RoHS Lead (Pb) Mercury Cadmium Hexavalent Chromium PBB PBDE Concentration Limit per RoHS (values are not yet fixed) < 1000 PPM < 1000 PPM < 100 PPM < 1000 PPM < 1000 PPM < 1000 PPM Concentration contained in CEL devices -A Not Detected Not Detected Not Detected Not Detected Not Detected Not Detected -AZ (*)
If you should have any additional questions regarding our devices and compliance to environmental standards, please do not hesitate to contact your local representative.
Important Information and Disclaimer: Information provided by CEL on its website or in other communications concerting the substance content of its products represents knowledge and belief as of the date that it is provided. CEL bases its knowledge and belief on information provided by third parties and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. CEL has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. CEL and CEL suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall CEL's liability arising out of such information exceed the total purchase price of the CEL part(s) at issue sold by CEL to customer on an annual basis. See CEL Terms and Conditions for additional clarification of warranties and liability.

▲Up To Search▲

Price & Availability of PS7142-1A-A

	To Download PS7142-1A-A Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .